Specification:

Input voltage range (3S-4S LiPo operation): 9 - 18V DC

Regulated 5V and 12V outputs

LED power indicators ( 5V & 12V outputs )

6 ESC outputs & 1 pair VCC/GND pads

ESC outputs:

Continuous current: 25A*4 or 15A*6

Peak current (10 seconds/minute): 30A*4 or 20A*6

BEC 5V output:

Designed for RC Receivers, Flight controllers, OSD, and Servos.

DC/DC synchronous buck regulator.

Voltage: 5.0 +/- 0.1VDC

Continuous current: 2 Amps (Max.2.5A 10s/minute)

Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)

Short-circuit tolerant (5 seconds/minute)

BEC 12V output:

Designed for Video TX or FPV camera with linear regulator.

The battery should be 4S LiPo (13~18V DC)

 Voltage: 12.0 +/- 0.3VDC

Continuous current: 500mA (Max.0.8A 5s/minute)

Short-circuit tolerant (2 seconds/minute)

BEC 12V @ 3S LiPo

Output voltage= 3S LiPo voltage -1V

Physical:

Dimensions: 36 x 50 x 4 mm (without XT60)

Mounting: 30.5 x 30.5mm, Φ3mm

 Weight: 7.5g(w/o XT60), 11g(w/ XT60)

Package Contains:
1Nos XT60 PDB